Best answer: When should I service my new bike?

We’d recommend that you book your first bike service in after 3 months of riding. Those initial adjustments and checks are extra important. When your bike is first assembled the new parts take some time and riding to get to know each other.

How long should my first bike service be?

Bikes aren’t serviced on miles/weeks, but its more about hours – a bit like an MX bike. And yes, you can do it. And then whatever tools are required. I’d go on about 4 to 8 weeks depending on use.

When should I service my motorcycle?

Service intervals for your motorcycle will vary based on your model and your driving style, but, in general, you should ensure that your bike receives routine service every 500 to 600 miles or every six months, whichever comes first.

How often should I lube my road bike chain?

Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.

FASCINATINGLY:  Frequent question: What do professional cyclists eat during a race?

Is the first service free on a new bike?

Normally when you buy a new bike the LBS offers a first free service, usually to be done about a month after purchase. This is mainly to check brake and gear cables as they stretch a bit when used over the first month.

What happens if I don’t service my bike?

It is also mentioned that bikes not serviced according to schedule and with an authorized service center would lose warranty. The first service of a two wheeler is done at 500 -700 KM or one month of usage. During this service, Engine oil is changed and water service is done.

How do I maintain my new bike?

Here are 10 helpful Bike Maintenance Tips that will help you keep your bike looking and feeling brand new for a long time:

  1. Check Engine Oil: …
  2. Regularly Check Your Tyres: …
  3. Clean Air Filter: …
  4. Get your Transmission Inspected: …
  5. Take care of your Battery: …
  6. Clean your Bike: …
  7. Engine Maintenance: …
  8. Get your Clutch Adjusted.

How much should a motorcycle service cost?

Typical Cost of Annual Servicing

Unless you own a bike and nearly never ride it, regular maintenance will need to be done roughly every 4000 to 20,000 miles. This will depend on the particular bike. You can expect standard motorcycle maintenance to cost around $1,000 a year or up.

Can I use wd40 on bike chain?

You can use WD-40 Multi-Use-Product. It is a water based lubricant that provides the right amount of lubrication to the chain lube. … WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free.

FASCINATINGLY:  Best answer: How long is a 20 inch bike?

Should I clean my bike chain after every ride?

Ideally, chains should be thoroughly cleaned after each and every ride. … The cleaning process ranges from a simple wipe with a clean rag right through to a full degrease. A tip – centralise your chain on the cassette before back-pedalling to run the chain through the rag.

How do I know when to lube my bike chain?

Lube your chain when the cracks and crevices are vacant of lube. Ride 5 miles a week in good weather and you’re good for months. Average 30 miles a week in good weather and you should be lubing about every 2 weeks. Average 50 miles a ride in good weather, and it’s every ride.

How often should I service a road bike?

In general, we recommend that bikes get serviced at least once a year, regardless of whether or not they’re having any mechanical issues.

How many km should I service my bike?

Most bikes are serviced at 3000 km while those with bigger engines enjoy longer 5000, 6000 or even 10,000 km service interval.

How often should bicycles be serviced?

Recommended Maintenance Chart

Every Ride Monthly ~500 mi
Check your brake pads for wear and make sure that they are making firm contact with either the rim or the brake disc. Check all cables and cable housing for wear, kinks, rust, and fraying. Replace as needed and lube good cables/housing at entry/exit points.